The largest selection of coral fishes and reef animals in the North of England
- Catalogue
- Aquariums and Aquarium Products
- Cable Tidies, Wave Makers & Other Electrical Items
Cable Tidies, Wave Makers & Other Electrical Items
Dupla MultiControl Aquarium Computer and other aquarium electrical accessories
Xwave Wave Pump 6800
D&D Xwave Wave Pump 6800 : An Extra-Ordinary Wave-Maker
The new Xwave is a high quality, low voltage, high performance wavemaker for the marine or reef aquarium producing high water flow with a low energy cost
The Xwave pump is the ideal tool for moving high volumes of water at a low running cost within your marine aquarium. Like all stream type pumps the Xwave produces a wide, high volume area of laminar, low pressure waterflow which is gentle on coral tissue compared with the narrow directed jet which is obtained using a high pressure pump nozzle.
All Xwave pumps are controllable and come with a remote power supply which offers 5 selectable speeds as standard.
When used with the multi-controller (available separately) the options are even greater with a choice of funtions to tailor the pump output to your specific requirements.
The Xwave pump is the ideal tool for moving high volumes of water at a low running cost within your marine aquarium. Like all stream type pumps the Xwave produces a wide, high volume area of laminar, low pressure waterflow which is gentle on coral tissue compared with the narrow directed jet which is obtained using a high pressure pump nozzle.
All Xwave pumps are controllable and come with a remote power supply which offers 5 selectable speeds as standard.
When used with the multi-controller (available separately) the options are even greater with a choice of funtions to tailor the pump output to your specific requirements.
Flow rate: 3,000 to 13,000 l/h
Energy consumption: maximum 25 W
Input Voltage / frequency: 220-240V/50Hz (EU/UK)
Output Voltage: 12/24V DC
Energy consumption: maximum 25 W
Input Voltage / frequency: 220-240V/50Hz (EU/UK)
Output Voltage: 12/24V DC
Features :
- Advanced Pump Structure : a record for 13,000L/h at power consumption of 25 Watts.
- 3-D flow direction : with the special ball joint, that adjust the flow direction 3-dimensionally.
- High performance, Energy Saving : Hydro impellers (Without Shaft) enhance the hydrodynamic performance with low power consumption.
- Safety extra-low Voltage : 12/24V Wave Driver.
- Complete with attachments and suckers to allow fitment to any tank
Please Note : This Wave Pump is continuous running although the speed is adjustable
The optional Xwave Multicontroller (available separately) will allow the pump to pulse at preset intervals
The optional Xwave Multicontroller (available separately) will allow the pump to pulse at preset intervals
Money Saving Offer :
Buy the Xwave Wave Pump 6800 and Multicontroller together and save money
Buy the Xwave Wave Pump 6800 and Multicontroller together and save money
Xwave Multicontroller
Xwave Multicontroller : A comprehensive controller for Xwave and Stream pumps with built in moonlight fuction and LED
The new Xwave is a high quality, performance wavemaker for the marine or reef aquarium producing high water flow with a low energy cost. This Multi-Controller expands the options for use of the pumps into a whole new world of water movement.
All Xwave pumps are controllable and come with a remote power supply which offers 5 selectable speeds as standard. When used with this multi-controller the options are even greater with a choice of functions to tailor the pump output to your specific requirements.
All Xwave pumps are controllable and come with a remote power supply which offers 5 selectable speeds as standard. When used with this multi-controller the options are even greater with a choice of functions to tailor the pump output to your specific requirements.
Pulse Mode:
Produces 30 second cycles of flow at 50% power and then 50% power creating wave surges within the aquarium.
Interval Mode 1:
Controls two separate pumps on alternating cycles between 50% and 100% power over a 150 second repeating cycle
Interval Mode 2:
Controls the two separate pumps on a second different cycle
Random Mode:
This program is set up to use a random output of the pump. An irregular combination can produce turbulent currents. The occurrence of turbulence for a few hours per week is beneficial for the reef aquarium as it simulates the de-sedimentation of the stony structures in the reef zones.
Cycle Mode:
A combination process. This program is set to run from Mode A to Mode D and each mode executes for 30 minutes.
Food Time Mode:
This program is set to stop the pump during feeding. After 8 minutes the system is restored to the previous program. During the feeding mode all the function keys are deactivated. The feeding mode minimises the loss of fish and coral food directly into the filter system
Night Mode:
This program works with the built-in timer. It can run together with all other programs except for Food Time Mode. When the Night Mode is applied and the time is at the preset night time, (see setting of night time), Night Mode will be executed. The pump will operate at 30% output and the Super-Lux LED will switch on until the night period is over. During the Night Mode all the function keys are deactivated.
With the difference between the day and night environments the organisms inside the aquarium can regain their natural biological clock which enhances reproduction and growth.
With the difference between the day and night environments the organisms inside the aquarium can regain their natural biological clock which enhances reproduction and growth.
Suitable for controlling both Xwave and Tunze wave pumps
What's In The Box?
Xwave Multicontroller complete with integral lead attached to the super-lux LED
Rubber Suction Cup to hold Multicontroller to tank wall
(Please Note : The multi-plug lead for connecting the Multicontroller to the pump power supply is supplied with the Xwave Pump, not with this unit)
Rubber Suction Cup to hold Multicontroller to tank wall
(Please Note : The multi-plug lead for connecting the Multicontroller to the pump power supply is supplied with the Xwave Pump, not with this unit)
Money Saving Offer :
Buy the Xwave Wave Pump 6800 and Multicontroller together and save money
Buy the Xwave Wave Pump 6800 and Multicontroller together and save money
Ocean Pulse Duo Wave Maker
Ocean Pulse Duo Wave Maker : Creating Motions in Captive Oceans
Controls up to 2 pumps of 77w max per pump
Timer range adjustable between 10 secs to 6 minutes
Pumps will be alternately ON/OFF according to the desired set time sequence
Full UK specification : fitted with UK 3-pin mains plug and sockets
Timer range adjustable between 10 secs to 6 minutes
Pumps will be alternately ON/OFF according to the desired set time sequence
Full UK specification : fitted with UK 3-pin mains plug and sockets
- Creates desirable flow patterns only found in nature
- Flushes "dead spots" of detritus and accumulated waste
- Increases fish activity
- Stimulates coral and invertebrate growth
- Allows corals more exposure to available light
Natural Wave Multi-Cycle Pump Timer
Natural Wave Multi-Cycle Pump Timer Wave Maker from Aquarium Systems : the MaxiJet people
Alternating water currents created by the pumps and powerheads plugged into Natural Wave™ mimic actual wave patterns in the ocean, stimulating live corals and providing a more realistic aquatic environment.Varying water circulation can help reduce dead spots and help keep detritus in suspension,allowing it to be more easily captured by filters.
Natural Wave™ has 3 outlets with adjustable frequency – change duration of cycles from 20 seconds to 3 minutes.
Natural Wave™ also has 1 standard power outlet – so that accessories like lights, filters,or heaters may be plugged into the same outlet strip.
Natural Wave™ multi-cycle pump timer is affordable and economical.
Please Note : Image shown is of US version : UK model has same socket block but with 1 standard UK 3-Pin permanent socket and 3 standard UK 3-Pin variable timed sockets.
Complete with 1.5 metres of mains cable & standard UK 3-Pin plug. Unit also has safety overload protection
Timed sockets 1 & 2 : On/Off operating cycles adjustable from 20 seconds to 3 minutes : and output alternates between Socket 1 and 2 (i.e. when Outlet 1 is on : Outlet 2 is off)
Timed socket 3 : On/Off operating cycle is double : from 40 seconds to 6 minutes
Please note that any cycle timing setting will affect all three timed outlets : they cannot be set individually
Dimensions : 360mm x 60mm x 40mm.
Alternating water currents created by the pumps and powerheads plugged into Natural Wave™ mimic actual wave patterns in the ocean, stimulating live corals and providing a more realistic aquatic environment.Varying water circulation can help reduce dead spots and help keep detritus in suspension,allowing it to be more easily captured by filters.
Natural Wave™ has 3 outlets with adjustable frequency – change duration of cycles from 20 seconds to 3 minutes.
Natural Wave™ also has 1 standard power outlet – so that accessories like lights, filters,or heaters may be plugged into the same outlet strip.
Natural Wave™ multi-cycle pump timer is affordable and economical.
Please Note : Image shown is of US version : UK model has same socket block but with 1 standard UK 3-Pin permanent socket and 3 standard UK 3-Pin variable timed sockets.
Complete with 1.5 metres of mains cable & standard UK 3-Pin plug. Unit also has safety overload protection
Timed sockets 1 & 2 : On/Off operating cycles adjustable from 20 seconds to 3 minutes : and output alternates between Socket 1 and 2 (i.e. when Outlet 1 is on : Outlet 2 is off)
Timed socket 3 : On/Off operating cycle is double : from 40 seconds to 6 minutes
Please note that any cycle timing setting will affect all three timed outlets : they cannot be set individually
Dimensions : 360mm x 60mm x 40mm.
Natural Wave Maker £64.52
Shaver Adaptor
1amp fused shaver adaptor with safety sleeved pins.
Rating 1A, 250V AC, approvals/recognitions BS1363
Rating 1A, 250V AC, approvals/recognitions BS1363
Euro Converter Plug
The Euro Converter plug is an adaptor which converts 2.5A Europlugs to the BSI363 system format (European 2 pin to UK 3 pin).
With a hinged lid, secured with a screw, external fuse access and no loose parts.
Voltage: 240V 50Hz
Current rating: 2.5A
Load: 600W (max.)
Fuse: 5A
With a hinged lid, secured with a screw, external fuse access and no loose parts.
Voltage: 240V 50Hz
Current rating: 2.5A
Load: 600W (max.)
Fuse: 5A
Travel Adaptor Plug
Plug in adaptor that allows equipment fitted with European Schuko plug to be used in a UK mains outlet.
Voltage: 240V 50Hz
Fuse: 13A
Voltage: 240V 50Hz
Fuse: 13A
Quickfit Converter Plug
The quickfit converter plug converts the 2 pin Europlug to the UK BS1363 system format. (European 2 pin to UK 3 pin).
Designed to accept all variations of Europlug including filtered types. Safe and reliable connection first time and every time. Save time and effort on assembly, simply slide in and fully tighten the screw.
Voltage: 240V 50Hz
Current rating: 2.5A
Load: 600W (max.)
Fuse: 5A
Designed to accept all variations of Europlug including filtered types. Safe and reliable connection first time and every time. Save time and effort on assembly, simply slide in and fully tighten the screw.
Voltage: 240V 50Hz
Current rating: 2.5A
Load: 600W (max.)
Fuse: 5A
Please note: After fully assembling, a 'pull test' safety check is required
