Fluorescent Light Control Units

Lighting Control Units for the operation of standard T8 (1in.) & T5 (5/8 in.) linear fluorescent lamps

Hagen Glomat Starter Units

Hagen Glomat Starter Units

HAGEN introduces the new Single Glo and Double Glo Fluorescent Light Control Units.

They make it easy and convenient to either use or supplement with fluorescent lighting in a wide variety of applications, including aquariums, terrariums, vivariums and seed germination enclosures.

Single Glo uses a modern looking vented ballast cover that protects cabinets and canopies from excessive heat.

Double Glo uses a state-of-the-art electronic ballast for cool, quiet application.

Both have water-resistant end-caps, preventing damage caused by moisture or splashing water. The conveniently located mounting bracket permits safe and neat placement of the ballast.

By mounting the unit externally, away from the bulbs, there is a reduction of heat build-up commonly associated with conventional canopies.

The control unit can be used with or without an external timer, making it possible for complete control of any lighting system.

 

Hagen Glomat Single Starter Units

Hagen Glomat Single Starter Units

HAGEN introduces the new Single Glo Fluorescent Light Control Units

Single Glo uses a modern looking vented ballast cover that protects cabinets and canopies from excessive heat.
They have water-resistant end-caps, preventing damage caused by moisture or splashing water. The conveniently located mounting bracket permits safe and neat placement of the ballast. By mounting the unit externally, away from the bulbs, there is a reduction of heat build-up commonly associated with conventional canopies. The control unit can be used with or without an external timer, making it possible for complete control of any lighting system.

To fit 1 inch (26mm) diameter fluorescent tubes only

 

Hagen Glomat Double Starter Units

Hagen Glomat Double Starter Units

HAGEN introduces the new Double Glo Fluorescent Light Control Units

Will run two lamps from one unit

Double Glo uses a state-of-the-art electronic ballast for cool, quiet application.
They have water-resistant end-caps, preventing damage caused by moisture or splashing water. The conveniently located mounting bracket permits safe and neat placement of the ballast. By mounting the unit externally, away from the bulbs, there is a reduction of heat build-up commonly associated with conventional canopies. The control unit can be used with or without an external timer, making it possible for complete control of any lighting system.

A single control unit to run two fluorescent lamps, each one the same wattage as marked on the unit.

The wattage shown is the wattage of each of the two lamps that can be fitted to the unit, i.e. Glomat 2 20W will take 2 x 24" 20w fluorescent lamps

To fit 1 inch (26mm) diameter fluorescent tubes only

Customer Notice:

Please note the correct connection of the lamp leads as shown on the control unit outer casing. If you connect both leads from one end of the unit to both ends of the same tube, the tube will just flash on start up and not light up

The tube end caps are now also colour coded to aid the fitment of the correct lead/end cap to the correct tube

If you do connect wrongly, then tubes just flash on and immediately go off

Please also note that the control unit requires both tubes to be fitted to make it work. Will not fire up if only one tube fitted

 

Interpet Fluorescent Light Starter Units

Interpet Fluorescent Light Starter Units

Interpet Fluorescent Light Starter Units : New model with waterproof end caps

Essential lighting starter unit specifically designed for safely and effectively lighting aquarium fluorescent lighting tubes.

  • Suitable for all makes of tube
  • Fits 1" (T8) diameter tubes only
  • Long tube leads for flexible positioning of the Starter Unit
  • Easy access fluorescent starter switch
  • On/Off control switch
  • Complete with tube clips
Use :

14/15w unit for 370 x 26mm (15ins x 1ins) tubes

14/15w unit for 450 x 26mm (18ins x 1ins) tubes

18/20w unit for 600 x 26mm (24ins x 1ins) tubes

25/30w unit for 750 x 26mm (30ins x 1ins) tubes

25/30w unit for 900 x 26mm (36ins x 1ins) tubes

36/40w unit for 1050 x 26mm (42ins x 1ins) tubes

36/40w unit for 1200 x 26mm (48ins x 1ins) tubes


Sorry : but 8w unit is no longer available, having been discontinued by the manufacturer

A suitable alternative is the Arcadia 4/6/8w unit listed below

 

Aquael T8 Fluorescent Light Starter Units

Aquael T8 Fluorescent Light Starter Units

 

AquaEl Portable Lighting Units

AquaEl Portable Lighting Units

A ballast designed for fluorescent lamps.

It is perfectly suitable for illuminating aquariums/terrariums by providing an efficient light source.

It consists of an electronic fluorescent lamp ballast with fixtures installed on an elastic cord.

Available in :

T8 Tubes : 14/15/18/24w fluorescents

T5 Tubes : 24w fluorescents

Arcadia Ultra Seal Fluorescent Single Light Control Units

Arcadia Ultra Seal Fluorescent Single Light Control Units

New : with IP67 Waterproof lampholders

  • Meets NEW European lighting standards(IP67)
  • Recommended for running fluorescent lamps over aquariums and terrariums
  • Complete with new improved Ultra Seal waterproof lampholders
  • Supplied with exclusive Arcadia universal mounting brackets
Taking the extremely popular fluorescent controller, Arcadia has now developed new ULTRA SEAL® lamp holders to ensure that this product complies with new lighting safety requirements and to provide a greater flexibility for positioning the product by the use of longer lamp leads. Featuring a uniquely designed lamp holder ring design, which is totally waterproof.


The new ULTRA SEAL lamp holder design features a unique two-piece ring, which requires no additional water seal, or “O Ring”, this greatly assists in the ease of replacing lamps and ensures that the lamp holders are 100% watertight.

For additional safety they have reduced the mains lead length and increased the lamp holder leads to ensure greater flexibility in positioning the controller away from the water’s surface and for those aquarium set-ups that need additional lamp holder leads.

Each unit will operate a SINGLE lamp of the corresponding wattage

 

Arcadia Ultra Seal Fluorescent Double Light Control Units

Arcadia Ultra Seal Fluorescent Double Light Control Units

With IP67 Waterproof lampholders

  • Meets NEW European lighting standards(IP67)
  • Recommended for running fluorescent lamps over aquariums and terrariums
  • Complete with new improved Ultra Seal waterproof lampholders
  • Supplied with exclusive Arcadia universal mounting brackets
Taking the extremely popular fluorescent controller, Arcadia has now developed new ULTRA SEAL® lamp holders to ensure that this product complies with new lighting safety requirements and to provide a greater flexibility for positioning the product by the use of longer lamp leads. Featuring a uniquely designed lamp holder ring design, which is totally waterproof.

The new ULTRA SEAL lamp holder design features a unique two-piece ring, which requires no additional water seal, or “O Ring”, this greatly assists in the ease of replacing lamps and ensures that the lamp holders are 100% watertight.

For additional safety they have reduced the mains lead length and increased the lamp holder leads to ensure greater flexibility in positioning the controller away from the water’s surface and for those aquarium set-ups that need additional lamp holder leads.


Each unit will operate TWO lamps, each of the corresponding wattage

Each unit has ONE switch which operates both lamps at the same time. You therefore cannot switch on/off the two lamps independently

Apart from 14/15w Units all other Double Control Units have now been superceded by the NEW Arcadia Electronic Double T8 Control Unit ACE2U8

 

Arcadia Ultra Seal Electronic T5 Controller Single 80w

Arcadia Ultra Seal Electronic T5 Controller Single 80w

Ultra Seal Electronic T5 Controller

Takes 1 x T5 80w Tube

Water-Proof IP67 Ultra Seal End Caps and Controller

Complies with new European lighting standard
Totally eliminates flicker
Independent switch on mains lead

 

 

Continue shopping

 

NOTICE

All our orders were fulfilled by a fulfilment company that has gone into liquidation as of the 18th August 2011.


We are in the process of establishing a new relationship and have therefore suspended all orders. Please feel free to look around the site, but note that no orders are being processed and no credit cards have been charged until your order is shipped.


Due to the volume of email and calls we receive we can not respond to any of them at this time.


We'd like to thank our many customers for their custom and patience and ask that you are patient whilst we sort out our fulfilment of your orders.


If you have placed an order that has not been despatched yet, please rest assured that we will endeavour to ship as quickly as possible.


We will contact you before shipping your order to ensure that you still require it.