BLAGDON ACRYLIC POND PAINT

Ideal for sealing new ponds. 2 coat application - no primer required

Available in 3 colours and 3 sizes

Colours available : Stone, Blue and Black

Sizes available : 1 litre, 2.5 litre and 5 litre

Prices are the same for all colours

Click Here for more information

Before painting check your surfaces for imperfections, cracks etc and fill where appropriate. For large cracks in the concrete, vee out the cracks to approx 10mm - make sure the surface to be bonded is solid and dust free. Fill with Gold Label Pond & Aquarium Sealer. Painting can then commence immediately. Although Aqua Pond Paint is much safer than normal resin systems, it is recommended you should avoid contact by using barrier cream or gloves. Any splashes should be washed off with soap and water.

DO NOT apply in temperatures below 10°C

Add the hardener in the top unit to the paint in the bottom unit and stir throughly, making sure it is completely mixed - VERY IMPORTANT - stir for a minimum of 2 minutes.
If you don't need all the contents, you can split it into equal amounts and store the rest for later


PLEASE NOTE - Once mixed, the paint is usable for 1.5 hours in ambient temperatures. Over 20°c the working time will be reduced.

After mixing, apply immediately by brush, roller or spray. Ensure the coating is worked into the corners etc. Apply minimum of 2 coats. The second coat can be applied when the first is touch dry after approx 6-8 hours at 20°c. The same for any subsequent coats.

The paint will cure hard in 12 hours and full cure in 3-7 days, depending on atmospheric conditions. When fully cured, wash the painted surface and drain before final fill.

NB If rain is expected after application, protect for the initial cure time of 6-8 hours