The largest selection of coral fishes and reef animals in the North of England
- Catalogue
- Pond products
- Pond & Aquarium Sealing and Repair Compound
- Silicone Sealers
Silicone Sealers
Aquarium grade Silicone Sealer
Silicone Sealer
The 'only' safe method of building or repairing glass fish tanks.
The 25gm comes as a handy squeeze tube with plastic nozzle
The 78gm comes as a rigid tube with built-in hand pressure dispenser as shown in image
The 310ml cartridge requires a cartridge gun to dispense the silicone (not supplied but available from all DIY stores)
The 25gm comes as a handy squeeze tube with plastic nozzle
The 78gm comes as a rigid tube with built-in hand pressure dispenser as shown in image
The 310ml cartridge requires a cartridge gun to dispense the silicone (not supplied but available from all DIY stores)
All packs supplied as CLEAR Silicone Rubber Sealer
Safe for use with Freshwater, Saltwater and Invertebrates
Does not contain harmful fungicides as found in most other domestic sealants
Does not contain harmful fungicides as found in most other domestic sealants
Juwel Black Silicone Sealant 80ml
Black coloured silicone sealer in a handy tube especially designed for use in aquariums.
Useful for fixing the Structured Backgrounds to the back glass panel.
Useful for fixing the Structured Backgrounds to the back glass panel.
Under Water Pond and Aquarium Sealer
Under Water Pond & Aquarium Sealer :
Seals Underwater : No need to drain ponds
For Ponds, Spas, Pools, Marine, Construction
SOLVENT FREE
Seals Underwater : No need to drain ponds
For Ponds, Spas, Pools, Marine, Construction
SOLVENT FREE
For best results clean all surfaces, to be free of grease, algae ect. Place sealer directly on to the surface you wish to bond/seal.
For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum of 2mm thickness of bead width between surfaces.
Where there is livestock near the sealer protect from ingestion while curing. Full cure 24 hours, initial tack 2 – 3 hours.
Can be painted for up to 4 hours, if painting after this time then treat with acetone first.
For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum of 2mm thickness of bead width between surfaces.
Where there is livestock near the sealer protect from ingestion while curing. Full cure 24 hours, initial tack 2 – 3 hours.
Can be painted for up to 4 hours, if painting after this time then treat with acetone first.
Bonds all materials even underwater. Eg.
- Butyl rubber
- Vinyl
- Glass
- Plastic
- Ceramic
- Stone
- Concrete
- Wood ect
Shelf life 12 months if stored in dry conditions between 10° - 25°
290ml size comes with applicator nozzle, and requires the use of a universal Cartridge Gun (not supplied) : available from most DIY outlets.
